1. Which is considered to be the oldest and most commonly
used building material?
A. cement
B. wood
C. steel
D. stand
ANS: B
2. Which wood which is obtained from confers and are used
for training?
A. hard wood
B. softwood
C. dark wood
D. brown wood
ANS: B
3. Which wood is obtained from deciduous trees?
A. hard wood
B. softwood
C. dark wood
D. brown wood
ANS: A
4. Which is a binding agent that reacts with water to
form a hard-stone- like substances?
A. glue
B. cement
C. mortar
D. grout
ANS: B
5. Which term refers to inert material when bound
together into a conglomerated mass form concrete?
A. Aggregates
B. Gravel
C. Cement
D. Grout
ANS: A
6. A lumber that has been sawed, edged and trimmed in
which cutting marks are visible is _____ .
A. rough
B. smooth
C. dressed
D. worked
ANS: A
7. Which lumber has been put through planning machine
which gives fine surface?
A. rough
B. smooth
C. dressed
D. worked
ANS: C
8. Which lumber
that has been dressed and matched, ship lapped or patterned?
A. rough
B. smooth
C. dressed
D. worked
ANS: D
9. Which is a plank of wood that has been roughly cut?
A. timber
B. board
C. lumber
D. block
ANS: C
10. Which lumber has been cut from logs radially to the
growth rings and the fiber runs about parallel to the face?
A. edge-grain
B. angle-grain
C. flat-grain
D. close-grain
ANS: C
11. Which lumber has been cut tangentially to the growth
rings and the fiber runs about 90 degrees to the face?
A. edge-grain
B. angle-grain
C. flat-grain
D. close-grain
ANS: A
12. Which is the art of building with stone, bricks,
concrete block or other similar materials?
A. carpentry
B. concrete
C. mortar
D. masonry
ANS: D
13. If you want to go up stairs, which part do you hold
on to?
A. handrail
B. Read
C. handle
D. Riser
ANS: A
14. If you want to go up stairs, which part do you step
on?
A. handrail
B. Read
C. handle
D. Riser
ANS: B
15. What makes the door swing when close and open it?
A. Door knob
B. Door lock
C. Door shutter
D. Door hinge
ANS: D
16. A carpenter wants to construct a stair, what could be
the standard height of the riser?
A. 5-6 inches
B. 6-8 inches
C. 8-10 inches
D. 10-12 inches
ANS: B
17. In masonry works, it is necessary to wear protective equipment except __________ .
A. mask
B. goggles
C. gloves
D. ear muffs
ANS: D
18. In the construction site, what protects the carpenter
from failing objects?
A. hat
B. belt and harness
C. helmet
D. shed
ANS :C
19. In the
construction site, what protects the carpenter form falling?
A. hat
B. belt and harness
C. helmet
D. shed
ANS: B
20. These are compress baked clay that are processed into
workable materials?
A. stone
B. sand
C. bricks
D. CHB
No comments:
Post a Comment